How to install a toilet

In fact, many homeowners choose to remove their old toilet and replace it with a new one without the help of a handyman or plumber. This video will show you how to. Save the cost of a plumbing house call by installing your new toilet yourself. Taking out an old toilet and putting in a new one is something you can do yourself.

Once the toilet bowl is full, flush it a few times to make sure it is working correctly without leaks.

If the floor is dry and the toilet is not wobbling, so you have succeeded in the process! Conclusion: We have mentioned all the steps to help you to install a toilet flange like a professional plumber. These step-by-step instructions show how to easily install a macerating system in a home. Home repair expert Henry Harrison shows how to remove and replace a toilet.

On his elbow grease scale of one to four, Harrison gives. Are you planning to install a new toilet in your home? Before you do this, it is good to know the estimated costs so that you should be ready to incur.

In this guide, we have explained some of the important things you should put into consideration when setting a budget for a new toilet. The easiest solution for how to install toilet is a two-part ring that locks onto the plastic just like the old one. To cut away the old flange, use a hacksaw blade or an angle grinder with a metal-cutting wheel. The repair flange is available at some home centers, at plumbing supply stores or online (search for “bay flange”). To install them, set the toilet in place without the wax ring.

Use the shims to stabilize the toilet and tape in place. Remove the bowl and continue the installation with the wax ring. After the toilet is installe cut the excess shims with a knife. Check out our DIY Basics video on how to use shims.

On average, a standard toilet installation costs between $1and $2with most homeowners spending around $1to $180. A high-efficiency toilet with extra features can cost $8to $5to install. The first step is to cut off the water supply to the toilet.

Flush the remaining water and soak up any remaining water with a sponge. Make sure all the water has been eliminated. Then, remove the trim caps from the base.

Place the toilet seat where you want it and connect the included screws and nuts to secure the seat in place.

Turn the water on and look for leaks. Turn the water on at the toilet supply line (if applicable) and take a couple minutes to examine for. Install the toilet seat. Is your toilet cracked or damaged? Learn how to install a toilet quickly and easily with our bathroom DIY guide.

Find out how to remove a toilet and fit a new one safely, step-by-step. By using VictorianPlumbing. You may have to shim up the toilet or use a toilet base slab to prevent rocking. If the flange is set on the subfloor, you may need a flange extender. Then, use the template included with your holder to mark where the brackets and screws need to go.

Glue the remaining pieces of pipe and fittings into place, working your way from the main drain pipe back to the location of the toilet. Support the pipes every four feet with pipe straps.